Free shipping
30-Day Return
1-Year Warranty
365-Day Customer Support
Filtered for Your Health
We use precision-engineered membrane pores to filter what many systems leave behind, returning water to its cleanest, most balanced form.
Reverse Osmosis Filter
Purify
Stage 4: Reverse Osmosis/RO Membrane (0.0001μm)
The core of the system. Removes 99.9% of contaminants including lead, arsenic, PFAS, fluoride, and microplastics.
Post-Filter
Enhance
Stage 4: Post Carbon Filter/PCF (0.1μm)
A second pass with coconut shell carbon. Catches any lingering taste or odor so what reaches your glass is clean and fresh.
Pre-Filter
Clean
Stage 1: Polypropylene/PP Filter (5μm)
Catches sand, rust, silt, and sediment, protecting the filters downstream.
Stage 2: Coconut Shell Carbon/CTO Filter (0.5μm)
Removes chlorine, chloramine, and the chemicals responsible for bad taste and odor.
Reverse Osmosis Filter
Purify
Stage 4: Reverse Osmosis/RO Membrane (0.0001μm)
The core of the system. Removes 99.9% of contaminants including lead, arsenic, PFAS, fluoride, and microplastics.
Post-Filter
Enhance
Stage 4: Post Carbon Filter/PCF (0.1μm)
A second pass with coconut shell carbon. Catches any lingering taste or odor so what reaches your glass is clean and fresh.
Easy Steps to Replace Filters for ROPOT, ROPOT(UV)
Safety first: Please turn off the power, unplug the unit, empty the tank before replacement.
Safety first: Please turn off the power, unplug the unit, empty the tank before replacement.
Step 1
Gently remove the side cover.
Step 2
Tilt the old filter to a 45-degree angle and twist it clockwise to remove.
Step 3
Insert your new filters from left to right in this order: PP, CTO, RO, PCF.
Step 4
Line up the 2 triangle markers on each filter before installing.
Step 5
Push each filter in gently, then twist counter-clockwise until you feel it lock into place.
Step 6
Plug the unit back in and turn the power on.
Step 7
Tilt the No. 4 PCF filter up to 45 degrees to access the reset toggle switch.
Step 8
Press and hold the switch for 3 seconds to enter filter selection mode.
Step 9
Press the curved button to cycle through your filters, then press again to reset the one you just replaced.
Step 10
Wait for the flashing light to stop. That means the reset is complete. Repeat this for any other filters you swapped out.
Flush your new filters by running 3 full cycles before you drink the water. This clears out any manufacturing residue so you get the cleanest water possible.
Flush your new filters by running 3 full cycles before you drink the water. This clears out any manufacturing residue so you get the cleanest water possible.
Official Filters & Accessories
Designed specifically for your ROPOT to keep it performing at its best
