Free shipping
30-Day Return
1-Year Warranty
365-Day Customer Support
Filtered for Your Health
We use precision-engineered membrane pores to filter what many systems leave behind, returning water to its cleanest, most balanced form.
Reverse Osmosis Filter
Purify
Stage 4: Reverse Osmosis/RO Membrane (0.0001μm)
The core of the system. Removes 99.9% of contaminants including lead, arsenic, PFAS, fluoride, and microplastics.
Post-Filter
Enhance
Stage 4: Post Carbon Filter/PCF (0.1μm)
A second pass with coconut shell carbon. Catches any lingering taste or odor so what reaches your glass is clean and fresh.
Pre-Filter
Clean
Stage 1: Polypropylene/PP Filter (5μm)
Catches sand, rust, silt, and sediment, protecting the filters downstream.
Stage 2: Coconut Shell Carbon/CTO Filter (0.5μm)
Removes chlorine, chloramine, and the chemicals responsible for bad taste and odor.
Stage 3: Polypropylene Fabric/PP Filter (1μm)
Captures finer particles to further protect the RO membrane and extend its lifespan.
Reverse Osmosis Filter
Purify
Stage 4: Reverse Osmosis/RO Membrane (0.0001μm)
The core of the system. Removes 99.9% of contaminants including lead, arsenic, PFAS, fluoride, and microplastics.
Post-Filter
Enhance
Stage 4: Post Carbon Filter/PCF (0.1μm)
A second pass with coconut shell carbon. Catches any lingering taste or odor so what reaches your glass is clean and fresh.
Easy Steps to Replace Filters for ROPOT-Lite & ROPOT-Lite (UV)
Safety first: Please turn off the power, unplug the unit, empty the tank before replacement.
Safety first: Please turn off the power, unplug the unit, empty the tank before replacement.
Step 1
Gently remove the filter housing cover.
Step 2
Use the filter wrench to turn the old filter counterclockwise, then pull it out.
Step 3
Insert the new filter. Push down and turn clockwise with the wrench until it is secure.
Step 4
Place the filter housing cover back on.
Step 5
Plug the system back into the power outlet.
Step 6
Press and hold the Flush button and the Water button at the same time for 5 seconds to enter filter reset mode. During reset, only the Flush button will light up. The control panel will unlock after 4 flushing cycles.
Step 7
Fill the water tank up to the Max line and place it back onto the system.
Step 8
Tap the Flush button to start flushing water through the system.
Step 9
After one flushing cycle is complete, empty the water tank and carafe.
Step 10
Repeat the flushing process 4 times to fully clean the new filter.
Please note that the water is not drinkable during the flushing process.
Please note that the water is not drinkable during the flushing process.
Official Filters & Accessories
Designed specifically for your ROPOT to keep it performing at its best
