



RO Filter for ROPOT and ROPOT(UV)
(11)
High-precision RO purification for your ROPOT or ROPOT(UV). The 0.0001 μm RO membrane removes up to 99.99% of harmful contaminants for cleaner, more purified water. Note: Not compatible with ROPOT-Duo.
Fits ROPOT & ROPOT(UV)
$59.99
- Free Shipping
- 30-Day Return
- 365-Day Support
Easy Steps to Replace Filters for ROPOT, ROPOT(UV)
Safety first: Please turn off the power, unplug the unit, empty the tank before replacement.
Safety first: Please turn off the power, unplug the unit, empty the tank before replacement.

Step 1
Gently remove the side cover.

Step 2
Tilt the old filter to a 45-degree angle and twist it clockwise to remove.

Step 3
Insert your new filters from left to right in this order: PP, CTO, RO, PCF.

Step 4
Line up the 2 triangle markers on each filter before installing.

Step 5
Push each filter in gently, then twist counter-clockwise until you feel it lock into place.

Step 6
Plug the unit back in and turn the power on.

Step 7
Tilt the No. 4 PCF filter up to 45 degrees to access the reset toggle switch.

Step 8
Press and hold the switch for 3 seconds to enter filter selection mode.

Step 9
Press the curved button to cycle through your filters, then press again to reset the one you just replaced.

Step 10
Wait for the flashing light to stop. That means the reset is complete. Repeat this for any other filters you swapped out.
Flush your new filters by running 3 full cycles before you drink the water. This clears out any manufacturing residue so you get the cleanest water possible.
Flush your new filters by running 3 full cycles before you drink the water. This clears out any manufacturing residue so you get the cleanest water possible.
Official Filters & Accessories
Designed specifically for your ROPOT to keep it performing at its best
Save $20.70
Save $30.72
Save $22.49
Save $13.50
Save $20.70
Save $30.72
Save $22.49
Save $13.50
FAQs
Still have questions? We've got answers
The RO filter in Bluevua ROPOT and ROPOT(UV) lasts up to 24 months or approximately 4,000 liters of purified water, whichever comes first. Each filter has its own life indicator on the display, so replace the RO filter when its indicator reaches zero rather than following the replacement schedule of the other filters. If all four filters need replacing at the same time, consider the 4-Pack Replacement Filter Set.
This replacement RO filter is compatible with Bluevua ROPOT and ROPOT(UV) only. It installs in the third filter slot, between the CTO and PCF filters. ROPOT-Lite, ROPOT-Lite(UV), and ROPOT-Travel use separate 5-in-1 replacement filters with built-in RO membranes. If you own a Lite or Travel model, choose the 5-in-1 replacement filter designed specifically for your system.
The Bluevua RO filter uses a 0.0001 μm reverse osmosis membrane to help reduce contaminants such as heavy metals, microplastics, certain antibiotics, and pesticides in drinking water. The PP and CTO pre-filters help remove sediment and chlorine before water reaches the RO membrane, protecting it and supporting its performance. Replace these pre-filters on schedule to help extend the RO filter's lifespan.



