



5-in-1 Replacement Filter for ROPOT-Lite and ROPOT-Lite(UV)
(68)
A full year of clean, purified water for your ROPOT-Lite or ROPOT-Lite(UV). The patented 5-in-1 filter combines 0.0001 μm RO purification into one easy annual replacement.
Fits ROPOT-Lite & ROPOT-Lite(UV)
$79.90
$67.90
at Checkout- Free Shipping
- 30-Day Return
- 365-Day Support
Filtered for Your Health
We use precision-engineered membrane pores to filter what many systems leave behind, returning water to its cleanest, most balanced form.
Clean
- Stage 1Polypropylene (PP)5μm
- Stage 2Coconut Shell Carbon (CTO)0.5μm
- Stage 3Polypropylene Fabric (PP)1μm
Purify
- Stage 4RO Membrane0.0001μm
Enhance
- Stage 5Post Carbon (PCF)0.1μm
Easy Steps to Replace Filters for ROPOT-Lite & ROPOT-Lite (UV)
Safety first: Please turn off the power, unplug the unit, empty the tank before replacement.
Safety first: Please turn off the power, unplug the unit, empty the tank before replacement.

Step 1
Gently remove the filter housing cover.

Step 2
Use the filter wrench to turn the old filter counterclockwise, then pull it out.

Step 3
Insert the new filter. Push down and turn clockwise with the wrench until it is secure.

Step 4
Place the filter housing cover back on.

Step 5
Plug the system back into the power outlet.

Step 6
Press and hold the Flush button and the Water button at the same time for 5 seconds to enter filter reset mode. During reset, only the Flush button will light up. The control panel will unlock after 4 flushing cycles.

Step 7
Fill the water tank up to the Max line and place it back onto the system.

Step 8
Tap the Flush button to start flushing water through the system.

Step 9
After one flushing cycle is complete, empty the water tank and carafe.

Step 10
Repeat the flushing process 4 times to fully clean the new filter.
Please note that the water is not drinkable during the flushing process.
Please note that the water is not drinkable during the flushing process.
Official Filters & Accessories
Designed specifically for your ROPOT to keep it performing at its best
Save $19.03
FAQs
Still have questions? We've got answers
After installing a new 5-in-1 filter, plug in your Bluevua ROPOT-Lite or ROPOT-Lite(UV). Press and hold the Flush and Water buttons simultaneously for 5 seconds to enter filter reset mode. Only the Flush button will remain lit. Fill the water tank to the Max line and press Flush to begin. Empty the tank and glass carafe after each cycle. After 4 flushing cycles, the control panel will unlock automatically. Do not drink the water produced during these cycles.
Turn off and unplug your Bluevua ROPOT-Lite or ROPOT-Lite(UV), then empty the water tank. Remove the filter housing cover and use the included filter wrench to turn the old 5-in-1 filter counterclockwise and lift it out. Insert the new filter, press it down, and turn it clockwise with the wrench until secure. Reattach the filter housing cover. Keep the included filter wrench for future replacements.
The Bluevua 5-in-1 replacement filter is compatible with ROPOT-Lite and ROPOT-Lite(UV) only. ROPOT-Travel requires a different, shorter 5-in-1 filter, while ROPOT and ROPOT(UV) use four separate filters. For Lite owners replacing both the 5-in-1 and mineral filters, the ROPOT-Lite/ROPOT-Lite(UV) Wellness Filter Set includes one 5-in-1 filter and two mineral filters.
The Bluevua ROPOT-Lite/ROPOT-Lite(UV) 5-in-1 filter lasts approximately 12 months or 4,000 liters of purified water, whichever comes first. The filter life indicator tracks both time and usage, helping you know when a replacement is due. We recommend ordering a new filter when one bar remains and replacing it when the indicator reaches zero. If you also replace the mineral filter every six months, consider the ROPOT-Lite/ROPOT-Lite(UV) Wellness Filter Set.



