Free shipping
30-Day Return
1-Year Warranty
365-Day Customer Support
Filtered for Your Health
We use precision-engineered membrane pores to filter what many systems leave behind, returning water to its cleanest, most balanced form.
Reverse Osmosis Filter
Purify
Stage 4: Reverse Osmosis/RO Membrane (0.0001μm)
The core of the system. Removes 99.9% of contaminants including lead, arsenic, PFAS, fluoride, and microplastics.
Post-Filter
Enhance
Stage 4: Post Carbon Filter/PCF (0.1μm)
A second pass with coconut shell carbon. Catches any lingering taste or odor so what reaches your glass is clean and fresh.
Pre-Filter
Clean
Stage 1: Polypropylene/PP Filter (5μm)
Catches sand, rust, silt, and sediment, protecting the filters downstream.
Stage 2: Coconut Shell Carbon/CTO Filter (0.5μm)
Removes chlorine, chloramine, and the chemicals responsible for bad taste and odor.
Stage 3: Polypropylene Fabric/PP Filter (1μm)
Captures finer particles to further protect the RO membrane and extend its lifespan.
Reverse Osmosis Filter
Purify
Stage 4: Reverse Osmosis/RO Membrane (0.0001μm)
The core of the system. Removes 99.9% of contaminants including lead, arsenic, PFAS, fluoride, and microplastics.
Post-Filter
Enhance
Stage 4: Post Carbon Filter/PCF (0.1μm)
A second pass with coconut shell carbon. Catches any lingering taste or odor so what reaches your glass is clean and fresh.
Easy Steps to Replace Filters for ROPOT-Travel
Safety first: Please turn off the power, unplug the unit, empty the tank before replacement.
Safety first: Please turn off the power, unplug the unit, empty the tank before replacement.
Step 1
Twist the filter housing cover counter-clockwise to remove it.
Step 2
Use the filter wrench to twist the old filter counter-clockwise, then pull it out.
Step 3
Use the wrench to push down on the new filter while twisting clockwise to install it.
Step 4
Twist the filter housing cover clockwise to secure it.
Step 5
Turn the power back on. Find the reset button on the back of the water spout.
Step 6
Press and hold both the reset button and the water-making button at the same time for 5 seconds. The water-making button will stay locked until you've run through all 3 flushing cycles.
Step 7
Fill the water tank to the max line and place it back on the system.
Step 8
Press the water-making button to let fresh water flow through the system.
Step 9
Empty both the water tank and collection bottle when the cycle finishes.
Step 10
Repeat this flushing process 3 times total to clear your new filter completely.
The flushing water isn't safe to drink yet, so toss it out after each cycle.
The flushing water isn't safe to drink yet, so toss it out after each cycle.
Official Filters & Accessories
Designed specifically for your ROPOT to keep it performing at its best
