



Filtered for Your Health
We use precision-engineered membrane pores to filter what many systems leave behind, returning water to its cleanest, most balanced form.
Clean
- Stage 1Polypropylene (PP)5μm
- Stage 2Coconut Shell Carbon (CTO)0.5μm
- Stage 3Polypropylene Fabric (PP)1μm
Purify
- Stage 4RO Membrane0.0001μm
Enhance
- Stage 5Post Carbon (PCF)0.1μm
Easy Steps to Replace Filters for ROPOT-Travel
Safety first: Please turn off the power, unplug the unit, empty the tank before replacement.
Safety first: Please turn off the power, unplug the unit, empty the tank before replacement.

Step 1
Twist the filter housing cover counter-clockwise to remove it.

Step 2
Use the filter wrench to twist the old filter counter-clockwise, then pull it out.

Step 3
Use the wrench to push down on the new filter while twisting clockwise to install it.

Step 4
Twist the filter housing cover clockwise to secure it.

Step 5
Turn the power back on. Find the reset button on the back of the water spout.

Step 6
Press and hold both the reset button and the water-making button at the same time for 5 seconds. The water-making button will stay locked until you've run through all 3 flushing cycles.

Step 7
Fill the water tank to the max line and place it back on the system.

Step 8
Press the water-making button to let fresh water flow through the system.

Step 9
Empty both the water tank and collection bottle when the cycle finishes.

Step 10
Repeat this flushing process 3 times total to clear your new filter completely.
The flushing water isn't safe to drink yet, so toss it out after each cycle.
The flushing water isn't safe to drink yet, so toss it out after each cycle.
Official Filters & Accessories
Designed specifically for your ROPOT to keep it performing at its best
FAQs
Still have questions? We've got answers
After installing a new filter, turn on your Bluevua ROPOT-Travel and locate the reset button on the back of the water spout. Press and hold the reset button and water-making button simultaneously for 5 seconds to enter filter reset mode. The water-making button will remain locked until you complete 3 flushing cycles. Fill the water tank and run a flushing cycle, then empty the tank and glass bottle. Repeat this process twice more to complete all 3 cycles. Do not drink the water produced during these cycles.
The Bluevua ROPOT-Travel 5-in-1 filter should be replaced approximately every 6 months or after 2,000 liters of purified water, whichever comes first. The filter life indicator turns red when a replacement is needed. We recommend ordering a new filter as soon as the indicator begins changing color so you have one ready when it's time to replace it. If you travel frequently, consider keeping a spare 5-in-1 Replacement Filter for ROPOT-Travel on hand.
The Bluevua ROPOT-Travel 5-in-1 filter combines five filtration stages in a single cartridge: 5 μm polypropylene (PP), 0.5 μm coconut shell activated carbon, 1 μm polypropylene (PP), a 0.0001 μm reverse osmosis (RO) membrane, and 0.1 μm post-carbon filtration. The PP and carbon pre-filters help remove sediment and chlorine before water reaches the RO membrane. All five stages are replaced together in one cartridge, eliminating the need to track separate filter replacements.



