Free shipping
30-Day Return
1-Year Warranty
365-Day Customer Support
Filtered for Your Health
We use precision-engineered membrane pores to filter what many systems leave behind, returning water to its cleanest, most balanced form.
Pre-Filter
Clean
5μm Polypropylene (PP) Filter
Captures larger particles like sand, rust, and dirt. Protects the rest of the filters to keep them working longer.
Pre-Filter
Clean
5μm Polypropylene (PP) Filter
Captures larger particles like sand, rust, and dirt. Protects the rest of the filters to keep them working longer.
Easy Steps to Replace Filters for ROPOT, ROPOT(UV)
Safety first: Please turn off the power, unplug the unit, empty the tank before replacement.
Safety first: Please turn off the power, unplug the unit, empty the tank before replacement.
Step 1
Gently remove the side cover.
Step 2
Tilt the old filter to a 45-degree angle and twist it clockwise to remove.
Step 3
Insert your new filters from left to right in this order: PP, CTO, RO, PCF.
Step 4
Line up the 2 triangle markers on each filter before installing.
Step 5
Push each filter in gently, then twist counter-clockwise until you feel it lock into place.
Step 6
Plug the unit back in and turn the power on.
Step 7
Tilt the No. 4 PCF filter up to 45 degrees to access the reset toggle switch.
Step 8
Press and hold the switch for 3 seconds to enter filter selection mode.
Step 9
Press the curved button to cycle through your filters, then press again to reset the one you just replaced.
Step 10
Wait for the flashing light to stop. That means the reset is complete. Repeat this for any other filters you swapped out.
Please run the filtration cycles 3 times to flush the new filters before use.
Please run the filtration cycles 3 times to flush the new filters before use.
